LAUNCH CNC603A Injector Cleaner And Tester 6 Cylinders Injector Cleaning Machine CNC-603A Ultrasonic Injector Tester

LAUNCH CNC603A 6 Cylinders Auto Fuel Injector Testing Machine

LAUNCH CNC603A is a professional 6 cylinders auto fuel injector testing cleaning machine. It will help us clean and test the injectors of gasoline cars and motorcycles.

Support for more cars and motorcycles. Can Support diesel and gasoline washer .Its working voltage range is 220V.

LAUNCH CNC603A Car Fuel Injector Tester Cleaner has more languages Support For 99% Cars & Motorcycles.

Features:

1. Uniformity / spray ability test: to detect the uniformity of the fuel injection quantity of each injector and monitor the spray status of injectors thoroughly and carefully by using the backlight, and to back flush injectors.
2. Leakage test: to test the leakage and dribbling conditions of injectors under system pressure.
3. Injecting flow test: to detect the amount of fuel injected normally by injectors in 15 seconds.
4. Auto test: under specific working conditions and parameters, the precise simulation of test of injectors
5. Ultrasonic cleaning: to perform ultrasonic cleaning on multiple injectors at the same time, removing carbon deposits on injectors completely.
6. On-vehicle cleaning: Coming with a variety of disassembly-free cleaning connectors, the device can be used to perform on-vehicle cleaning and maintenance for various vehicle models.
7. Version information: to check the software version information of the current device.

Various Support:

Support for Audi,for Australia Ford,for Benz,for BMW,for Brilliance,for Chevrolet,for Chevy,for Chrysler,for Citroen,for Dacia,for Dadi,for Daewo,for Daihatsu,for Demo,for Fiat,for Ford,for GM,for Holden,for Honda,for Hyundai,for Isuzu,for Jaguar,for Kia,for Lancia,for Land Rover,for Mahindra,for Maruti,for Mazda,for Mitsubish,for Nissan,for Opel,for Peugeot,for Porsche,for Renault,for Romeo,for Rover,for Saab,for Seat,for Skoda,for Smart,for Subaru,for Suzuki,for Tata,for Toyota,for Volvo,for VW,for Yamaha.

How to Use CNC603A Car Fuel Injector Tester Cleaner?

1. Clean injector's outside with cleaning liquid before opening the machine .Putting injectors in ultrasonic bathtub after the

outside of injector is free of dirt. The cleaning fluid does not exceed the connection port of the pulse line.

2. Turn on ultrasonic system allowing the ultrasonic energy to dislodge any particles build-up inside the injectors. After

cleaning, the remaining cleaning fluid can be recycled.

3. Fixed injectors on main machine, testing injectors for resistance, shorts, and current draw.The test liquid can be added to the half of the glass tube.
4. Performing leak test, spray pattern, and flow rate testing on flow bench.The injectors are now returned to the flow bench for retesting of all functions.